PRODUCT |
STANDARD |
APPLICATION |
||
AWS |
JIS |
KS |
||
E308T0-1/-4 |
YF308C |
YF308C |
K-308T is formulated for MAG welding of 18%Cr-8%Ni stainless steels.It is designed for operation primarily in the flat position and for weldling horizontal fillet welds |
|
E308LT1-1/-4 |
YF308LC |
YF308LC |
K-308LT is designed for MAG welding of low carbon 18%Cr-8%Ni stainless steels. (AISI 304, 304L, 304LN, ASTM A157 Gr. C9; A320 Gr. B8C or D) |
|
E309T0-1/-4 |
YF309C |
YF309C |
K-309T is formulated for MAG welding of 22%Cr-12%Ni stainless steels. Typical applications is for welding of dissimilar steels, such as 304 to mild steel or low alloy steels. |
|
E309LT1-1/-4 |
YF309LC |
YF309LC |
K-309LT is designed for MAG welding of low carbon 22%Cr-12%Ni stainless steels. Dissimilar joint welds ; of and between high-strength, mild steels and low-alloyed QT-steels, stainless, ferritic Cr- and austenitic Cr-Ni-steels, manganese steels. Cladding ; for the first layer of corrosion resistant weld claddings on ferritic-perlitic steels in boiler and pressure vessel parts up to fine-grained steel S500N. |
|
EC309L |
YF309LG |
YF309LG |
K-309LMT is designed for MAG welding of low carbon 22%Cr-12%Ni stainless steels.It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange. (AISI 409, 436, cladding and dissimilar joint welds) |
|
E309LMoT1-1 |
YF309MoLC |
YF309MoLC |
K-309MoLT is designed for MAG welding of low carbon 22%Cr-12%Ni-Mo stainless steels. Dissimilar joint welds ; of and between high-strength, mild steels and low-alloyed QT-steels, stainless, ferritic Cr- and austenitic Cr-Nisteels, manganese steels. Cladding ; for the first layer of corrosion resistant weld claddings on ferritic-perlitic steels in boiler and pressure vessel parts up to fine-grained steel S500N. |
|
E312T1-1 |
- |
- |
K-312T is formulated for MAG welding of 30%Cr-9%Ni stainless steels. It is used for joining dissimilar steels, steels with reduced weldability and buffer layers prior to hardfacing (rolls, forging dies, hotwork tools, dies for plastics and so on) |
|
E316T0-1/-4 |
YF316C |
YF316C |
K-316T is formulated for MAG welding of 18%Cr-12%Ni-2%Mo stainless steels where increased resistance to pitting corrosion is required (AISI 316, 316L) |
|
E316LT1-1/-4 |
YF316LC |
YF316LC |
K-316LT is designed for MAG welding of low carbon 18%Cr-12%Ni-2%Mo stainless steels. This wire has low carbon content which gives good resistance to most types of corrosion of the weld metal (AISI 316L, 316Ti, 316Cb) |
|
E317LT1-1 |
YF317LC |
YF317LC |
K-317LT is designed for MAG welding of low carbon 19%Cr-13%Ni-3%Mo stainless steels. The principal area of plication is process and chemical plant, shipbuilding as well as clear plant industries. |
|
E2209T1-1/4 |
- |
- |
K-329T is formulated for MAG welding of 23%Cr-9%Ni-3%Mo duplex stainless steels.The principal area of application is chemical plant and shipbuilding as well as nuclear plant industries. |
|
E347T1-1 |
YF347C |
YF347C |
K-347T is formulated for MAG welding of 18%Cr-8%Ni-Nb stainless steels. |
|
EC409 |
- |
- |
K-409TiT is developed to meet the needs of the auto-motive exhaust fabricators that desired a metal cored wire. It excels in the pulsed GMAW mode. |
|
E410T0-1/-4 |
YF 410C |
YF 410C |
K-410T is designed for MAG welding of martensite stainless alloys of the 13%Cr types. It is used for surfacing of sealing faces of valves for gas,water, and steam piping system at service temperatures up to 450° |
|
E410NiMoT0-4 |
- |
- |
K-410NiMoT is designed for MAG welding of soft-martensite stainless alloys of the 13%Cr-4%Ni-Mo types. |
|
E430T0-G |
YF430G |
YF430G |
K-430T is designed for MAG welding of ferrite stainless alloys of the 17%Cr-Ti types. It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange, etc. |
|
- |
- |
- |
K-436T is designed for MAG welding of stainless steels of the 17%Cr-1% Mo-Ti types. It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange, etc. |
|
- |
- |
- |
K-439T is designed for MAG welding of stainless steels of the 18%Cr-1%Ti types.It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange, etc |
|
E309LT0 -1/-4 |
YF309LC |
YF309LC |
K-309LF is designed for MAG welding of low carbon 22%Cr-12%Ni stainless steel. Dissimilar joint welds ; of and between high-strength, mild steels and lowalloyed QT-steels, stainless, ferritic Cr-and austenitic Cr-Ni-steels, manganese steels. Cladding ; for the first layer of corrosion resistant weld claddings on ferritic-perlitic steels in boiler and pressure vessel parts up to fine-grained steel S500N |
|
E316LT0-1/-4 |
YF316LC |
YF316LC |
K-316LF is designed for MAG welding of low carbon 18%Cr-12%Ni-2%Mo stainless steel. |
|
EC409 |
- |
- |
K-409TiC is developed to meet the needs of the auto-motive exhaust fabricators that desired a metal cored wire. It excels in the pulsed GMAW mode. |
|
E308LT0-1/-4 |
TF308LC |
TF308LC |
MAG welding of low carbon 18%Cr-8%Ni Stainless steel and used to join 301, 302, 304, 308 stainless steel |